MINI ACDP module 11 For BMW Gearbox EGS ISN Clearance

Yanhua ACDP module 11 is confirmed working for BMW 6HP EGS refresh and clone(Support F chassis) without removing and welding.

BMW 6HP EGS data refresh function: needs programming and coding before assembling the module back to the car after refreshing; BMW 6HP read/write data function: writing the data to the new module which read from the old one, which known as clone so that assemble back to car directly.

Seeing is believing:  

Image 1: 8HP ISN clear (Support F /G chassis) and 6HP data refresh (Support F chassis)

Image 2:  6HP data refresh (Support F chassis)

Data refresh and Read/write data.

Image 3: 8HP ISN clear (Support F /G chassis)

EGS state

Clear ISN

Reset adaption

Backup coding

Recover coding

Guide on Yanhua ACDP + module11 refresh 6HP data (Support F chassis) 

Part 1: wiring

Step 1. Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Step 2. Connect the 6HP end of the EGS interface board to the EGS module interface.

Step 3. Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal.

Step 4. Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.

More Yanhua ACDP Tech Support: http://www.yanhuaminiacdp.com